Analisis Kompetensi Kerja Tukang Plester di Kota Palu

A.  Asnudin; M.A. Ridwan

doi:10.22487/renstra.v2i2.335

Authors

A. Asnudin Jurusan Teknik Sipil, Fakultas Teknik Universitas Tadulako, Jl. Soekarno-Hatta Km 9, Palu 94118, Indonesia
M.A. Ridwan Alumni Jurusan Teknik Sipil, Fakultas Teknik Universitas Tadulako, Jl. Soekarno-Hatta Km 9, Palu 94118, Indonesia

DOI:

https://doi.org/10.22487/renstra.v2i2.335

Keywords:

plasterers, competence, SKKNI.

Abstract

One effort to empower the implementation of construction projects in order to maintain the quality of the final work is the application of competency standards for workers who hold a strategic position in determining the quality of the final building, in this case plaster workers. The aims of this research was to know the application of plasterer competency standards based on the Indonesian National Work Competency Standards (SKKNI) on building projects in Palu City. This research was conducted on plasterers of buildings in the city of Palu. The research method used was literature study, the primary data collection was done by distributing the questionnaires. The selected respondents were plasterers. Data were processed by using descriptive statistical methods and using the Relative Rank Index (RRI). The results showed that the application of plasterers' work competency standards based on SKKNI was around 80% to 90% which had been well implemented, namely, carrying out Preparation of Plastering Work, Carrying Out Plaster Mixing Mixes, Carrying Plaster Work. In addition, around 20% to 30% have not been well implemented, namely, the use of PPE and WSE, Making Job Reports.

Downloads

Download data is not yet available.

References

Presiden Republik Indonesia, Undang-Undang Republik Indonesia Nomor 2 Tahun 2017 Tentang Jasa Konstruksi, Jakarta: Sekretariat Negara, 2017.

Kompas.com, Hanya 720.000 dari 8,1 Juta Tenaga Konstruksi yang Bersertifikat, https://properti.kompas.com/read/2018/07/30/161920121/hanya-720000-dari-81-juta-tenaga-konstruksi-yang-bersertifikat , diakses 11 Agustus 2018.

I. Kodri, H. Fitriani, and I. Juliantina, "Analisis Pengaruh Pelatihan dan Sertifikasi terhadap Produktivitas Pekerja," Media Komunikasi Teknik Sipil, vol. 24, no. 1, p. 9, 2018.

G. Vitri and D.I. Mazni, “Deskripsi Sertifikasi Kompetensi Tukang Lokal di Provinsi Sumatera Barat”, Jurnal Rab Construction Research, vol. 3, no 1, p. 284, 2018.

M.B. Wineke, V. Rismila, P. Nugraha, and T. E. Tumbelaka, “Aspek-Aspek Yang Mendukung Peningkatan Kinerja Tukang Dalam Proyek Konstruksi di Surabaya”, Jurnal Dimensi Pratama Teknik Sipil, vol. 7, no. 2, p. 217, 2018

S.A. Nugraha, W. Mawardi, and F. Purwangka, “Identifikasi KompetensiKerja Pada Area DockingKapal di Ppn Palabuhanratu, Kabupaten Sukabumi Jawa Barat”, Jurnal Ilmiah Samudra Akuatika, vol. 2, no. 1, p. 23, 2018

B. Haryadi, “Kompetensi Tenaga Kerja Konstruksi Dalam Menghadapi Era Liberalisasi”, Inersia, vol. 6, no. 1, p. 33, 2010.

P. Suartanaa, R.J.M. Mandagi, and D. Wilar, “Pengaruh Pengetahuan Keselamatan dan Kesehatan Kerja (K3) Terhadap Perilaku Pekerja dan Kecelakaan Kerja Pada Proyek di DS LNG Kabupaten Banggai Propinsi Sulawesi Tengah”, Rekonstruksi Tadulako: Civil Engineering Journal on Research and Development, vol. 2, no. 1, p. 15, 2021.

A. Gunasti, “Penilaian Standar Kompetensi Kerja Tukang Besi/Beton Pada Proyek Konstruksi di Kabupaten Jember”, Jurnal Rekayasa Tenik Sipil Universitas Madura, vol. 2, no. 2, p. 12, 2017.

Presiden Republik Indonesia, Undang –Undang Republik Indonesia Nomor 13 Tahun 2003 Tentang Ketenagakerjan, Jakarta: Sekretariat Negara, 2003.

Kementrian Pekerjaan Umum, Standar Kompetensi Kerja Nasional Indonesia (SKKNI) Tukang Plester, Jakarta: Yayasan Badan Penerbit PU, 2016.

N. Sudjana and Ibrahim, Penelitian dan Penilaian Pendidikan, Bandung: Sinar Baru Algensindo, 2009.

M. Ali, Penelitian Kependidikan Prosedur dan Strategi, Bandung: Angkas, 1993.

I. Maulana, R. Arthur, and Daryati, “Kualitas Tes Kompetensi Tukang Aci dan Plesteran Berdasarkan SKKNI”, Jurnal Pendidikan Teknologi dan Kejuruan, vol. 16 no. 2, p. 149, 2019.

Prasetyo, “Kompetensi Tenaga Terampil Konstruksi di Smk Kartika V-1 Balikpapan”, Kurva S, vol. 1, no. 7, p. 1, 2019.