Pengaruh Penambahan Dinding Geser Terhadap Perilaku Struktur pada Gedung Bertingkat 10 Lantai di Kota Malang
DOI:
https://doi.org/10.22487/renstra.v6i2.729Keywords:
shearwall, drift, earthquake load, building structureAbstract
Building planning with earthquake-resistant structures is carried out to reduce the risk of loss and loss of life during earthquakes, especially in areas with high earthquake risk. This planning aims to evaluate the effect of adding shear walls on the structural behavior of a 10-story building in Malang City. Shear walls are generally used to increase structural stiffness and strengthen the structural system in resisting earthquake forces. With the addition of shear walls, better control of inter-story deviations where the value is significantly reduced compared to being designed as a single system. Shear walls or moment-resisting frames must be able to withstand at least 25% of the design earthquake force. Structural analysis is carried out with the ETABS 19 civil engineering assistance program using building technical data, material data, and building design drawings. The analysis includes determining dimensions based on SNI 2847: 2019 and loading and structural control based on SNI 1726: 2019. The results of the structural analysis show that with the addition of shear walls, the structural elements used are more effective and do not reduce the structure's ability to withstand earthquake loads or gravity loads. The planned shear wall has been able to accept more than 50% of the existing earthquake force, this result has met the minimum requirements for the load carried by the shear wall. The resulting drift also does not exceed the permissible drift, although there is a fairly large difference in the drift value. However, the determination of the location of the shear wall must still be adjusted to the needs and adjust the design of the planned building
References
P. Astuti, “Pengaruh Penambahan Dinding Geser (Shear Wall) pada Waktu Getar Alami Fundamental Struktur Gedung”, Jurnal Ilmiah Semesta Teknika, vol. 18, no. 2, p. 140, 2015.
R.S. Windah, “Penggunaan Dinding Geser Sebagai Elemen Penahan Gempa Pada Bangunan Bertingkat 10 Lantai”,Jurnal Ilmiah Media Engineering, vol. 1, no. 2, p. 151, 2021.
R. Nursani and D.E. Noor, “Analisis Pengaruh Penambahan Dinding Geser terhadap Perilaku Struktur Gedung Sistem Ganda”, Jurnal Teknik Sipil dan Lingkungan, vol. 08, no. 02, p. 1, 2023.
R. Timurtiningrum, Andaryati, G. Sarya, G.R.R.F. Febrianno, and E.N. Fitriyati, “Studi Perbandingan Perilaku Gedung Beton Bertulang Menggunakan Sistem Ganda dengan Dinding Geser dan Bresing Terhadap Beban Gempa”, Jurnal Rekayasa dan Manajemen Kosntruksi, vol. 9, no. 3, p. 133, 2021.
R. Widianingsih, Suhendra, and W. Dony, “Pengaruh Penempatan Dinding Geser pada Pembangunan Gedung Laboratorium Bertingkat 5”, Jurnal Teslink: Teknik Sipil dan Lingkungan, vol. 5, no. 1, p. 34, 2023.
A.D.S. Purwantoro, M.N. Fajar, H. Arifin, M. Aris, and A. Jafar, “Studi Perbandingan Pengaruh Letak Dinding Geser Pada Bangunan Bertingkat Akibat Beban Gempa”, Jurnal Konstruksia, vol. 15, no. 1, p. 35, 2023.
M.E.I. Diansyah and U. Khatulistiani, “Perencanaan Struktur Gedung Hotel Royal Isnin 10 Lantai Menggunakan Metode Sistem Ganda Di Kota Surabaya”, Jurnal Rekayasa dan Manajemen Konstruksi, vol. 7, no. 2, p. 137, 2019.
Soelarso, Baehaki, and A. Mursyidan, “Analisis Struktur Gedung Bertingkat di Lima Wilayah di Indonesia Terhadap Beban Gempa Dan Beban Angin Berdasarkan Sni 1726-2012 dan SNI 1727-2013,” Jurnal Fondasi, vol. 6, no. 1, p. 1, 2017.
A.W. Zebua, “Analisis Gaya Gempa Bangunan Rumah Tinggal Di Wilayah Gempa Tinggi”, Jurnal Teknik Sipil Siklus, vol. 4, no. 1, p. 62, 2018.
L. Fauziah, M.D.J. Sumajouw, S.O. Dapas, and R.S. Windah, “Pengaruh Penempatan Dan Posisi Dinding Geser Terhadap Simpangan Bangunan Beton Bertulang Bertingkat Banyak Akibat Beban Gempa”, Jurnal Sipil Statik, vol. 1, no. 7, p. 466, 2013.
Badan Standardisasi Nasional, SNI-1726-2019 Tata Cara Perencanaan Ketahanan Gempa Untuk Struktur Bangunan Gedung dan Nongedung, Jakarta: Badan Standardisasi Nasional, 2019.
K. Umam, D. Rochmanto, Y.A. Saputro, and S. Fauziah, “Analisa Gaya Geser Dasar Dan Gaya Dalam Pada Kolom Terhadap Penambahan Dinding Geser”, Portal Jurnal Teknik Sipil, vol. 12, no. 2, p. 85, 2020.
Muliadi, M. Afifuddin, and T.B. Aulia, “Analisis Simpangan Antar Lantai Pada Bangunan Menggunakan Base Isolator Di Wilayah Gempa”, vol. 3, no. 4, p. 25, 2017.
N.L. Novitasari, N.K.A. Agustini, and P.I. Wahyuni, “Analisis Sistem Struktur Ganda Pada Gedung Kantor Dan Gudang Sunia Negara”, Jurnal Rekayasa Teknik Sipil dan Lingkungan, vol. 5, no. 2, p. 40, 2024.
N.A. Usmat, I. Imran, and M.A. Sultan, “Analisa Letak Dinding Geser (Shear Wall) Terhadap Perilaku Struktur Gedung Akibat Beban Gempa”, Techno: Jurnal Penelitian, vol. 08, no. 02, p. 46, 2019.
D. Fazrian, Z. Djauhari, and Ridwan, “Keruntuhan Progresif Gedung Beraturan Sistem Ganda,”, Jurnal teknik Sipil, vol. 14, no. 3, p. 161, 2017.
Badan Standardisasi Nasional, SNI-1727-2020 Beban Desain Minimum dan Kriteria Terkait Untuk Bangunan Gedung dan Struktur Lain, Jakarta: Badan Standardisasi Nasional, 2020
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 REKONSTRUKSI TADULAKO: Civil Engineering Journal on Research and Development

This work is licensed under a Creative Commons Attribution 4.0 International License.